Расписание секции "Материаловедение и металлургия"
Advanced materials and technologies |
||
09.07.2015 |
||
10.00-10.20 |
Amorphous Copper-Based Alloys: Structure, Technology, and Properties |
Andrey Tiagunov |
10.20-10.40 |
About the Plasma Synthesis of сhromium carbonitride nanopowder and Study its Properties |
Ludmila Shiryaeva |
10.40-11.00 |
Complex Gradient Protective Coatings for Single Crystal Cooled Turbine Blades Used in Modern GTE |
Nikolay Popov |
11.20-11.40 |
Synthesis of Intermetallic Composite Ti-Nb-Al Sistem
|
Irina Kirillova |
11.40-12.00 |
Correlation Equation for Pitting Potential of Austenitic Steels Alloyed with Nitrogen |
Eugeny Merkushkin |
12.00-12.20 |
Development of Technology Plasma Synthesis of Titanium Boride
|
Ksenia Efimova |
12.20-12.40 |
Features of Iridium Processing in Solid-Drawn Crucibles Manufacturing Technologies
|
Aleksey Fomin |
13.00-14.00 |
Lunch
|
|
14.00-14.20 |
Production Feature of Soft Magnetic Amorphous Alloys
|
Ksenya Shmakova |
14.20-14.40 |
Influence of Ionic Composition of Solution on Division of Rare Earth Elements by Method of Liquid Extraction |
Stanislav Khruskin |
14.40-15.00 |
The Influence of Non-Equilibrium Structure on the Mechanical Properties of Heat-Resistant Titanium Alloy |
Ksenya Petrova |
15.00-15.20 |
Beta-Phase Decomposition Sequence during Continuous Cooling of High-Temperature Titanium Alloy |
Dmitry Gadeev |
15.20-15.40 |
Investigation of the Structure and Properties of Materials "Cu-Ti3SiC2" of Aleksandr Romashkin Tool-Electrode for Electrical Discharge Machining |
Svetlana Oglezneva |
15.40-16.00 |
Texture in Hot Rolled Alloy Fe-3%Si |
Sergey Danilov |
10.07.2015
|
||
10.00-10.20 |
Structural and Luminescent Features of Nanoporous Aluminum Oxide under Galvanostatic Anodizing |
Denis Ilyin |
10.20-10.40 |
Study of Microwave Properties of Composite Materials Based on the Nanocrystalline Soft-Magnetic Powder |
Anastasya Kashirina |
10.40-11.00 |
Study of Phase Transformations and Stability of Nitride Phases in Nitrided Iron Powder |
Artem Yurovskih |
11.00-11.20 |
The Structure and Development of Defects in the Cast Metal of Long-Sized Two-Piece Cr-Ni-Mo Ingots |
Dmitry Rutsky |
11.20-11.40 |
The Structure and Phase Composition of the Diffusion Zone in a Titanium and Steel Composite |
Oleg Slautin |
11.40-12.00 |
The Bases of the Theory of Subfamilies of Mechanisms
|
Alexey Fomin |
13.00-14.00 |
Lunch
|
Progressive methods of metal forming |
||
09.07.2015 |
||
10.00-10.20 |
Influence of Small Alloying Additions on the Strength of Iron Powder Compacts Pavel a. Polyakov1, Alexey v. Dolmatov2 |
Pavel Polyakov |
10.20-10.40 |
Dynamic Pressing Process Model Considering Compaction Shock Wave Propagation |
Andrey Polyakov |
10.40-11.00 |
Influence of Plasma Remelting on Structure of Arc Sprayed Fe-C-Cr-Ti-Al Coatings |
Vadim Verkhorubov |
11.00-11.20 |
Investigation of Plastic Properties of the Sheet Material by Testing on the Bending |
A. Naizabekov |
11.20-11.40 |
Finite Element Simulation of Rectangular Copper Bar Forming in Shape Rolling Process |
Aleksandr Postylyakov |
11.40-12.00 |
Subminiature Eddy Current Transducers for Studying of the Titanium Slabs Weld Seams |
Vladimir Malikov |
12.00-12.20 |
Prediction of the Carbon Segregation in Steel Ingots
|
Aleksandr Romashkin |
13.00-14.00 |
Lunch
|
|
14.00-14.20 |
Phenomena in Unstirred Precipitation of Aluminium Hydroxide from Sodium Aluminate Solution by Adding Aluminium Chloride |
Andrey Shoppert |
14.20-14.40 |
Production of the Hard Protective Coating of Aluminum Alloys by High-Microarc Oxidation |
Ilya Ponomarev |
14.40-15.00 |
Study of the Influence of ECA-Pressing at Different Temperatures on Structure and Mechanical Properties of Bronze |
A. Tolkushkin |
15.20-15.40 |
The Method for Measuring Residual Stress in the Heat Exchange Pipes of Nuclear Steam Generators |
Michael Rozenbaum |
15.40-16.00 |
Comparative Research of the Constructive Durability Strengthened Carbonaceous and the Hot-Rolled Alloyed Steel |
Alexey Bogomolov |
16.00-16.20 |
Neural Network Modeling of Coefficient of Burden Resistance to the Gas Movement in the Lower Part of the Blast Furnace in Conditions of Operation with Coke Nut |
Aleksandr Kharchenko |
Topical issues of building materials |
||
09.07.2015 |
||
10.00 -10.20 |
Baynovsk Clay for Ceramic Bricks Production
|
Irina Pavlova |
10.20-10.40 |
Fusible Enamel for Enameling Steel
|
Irina Voroshilova |
10.40-11.00 |
The Effect Of Nanoscale Fe2O3 on the Mechanical Properties of Polymer Modified Cement Containing Fly-Ash
|
Ekaterina Gerasimova |
11.00-11.20 |
Capillary Forces in Glass Batch Preparation
|
Olga Paramonova |
11.20-11.40 |
Chemical Activation of Aluminium in Salt Melt
|
Elena Farafontova |
13.00-14.00 |
Lunch
|
Highly efficient heat treatment technologies |
||
09.07.2015 |
||
14.00-14.20 |
Heat Treatment of Wear Resistant Steels for Mud Pumps
|
Aleksandr Zhilin |
14.20-14.40 |
Increasing the Wear Resistance of 42CrMo4 Tubes by Induction Heat Treatment |
Mikhail Maisuradze |
14.40-15.00 |
Influence of the Heating Temperature and the Cooling Conditions on the Structure and Properties of Two-Phase Titanium Alloy |
Fedor Vodolazskiy |
15.00-15.20 |
The Effect of Heat Treatment Temperature-Speed Parameters on Structure and Complex of Physical-Mechanical Properties in the Titanium Alloy vst5553 Rod Semi-Finished Goods |
Anna Zhelnina |
15.20-15.40 |
Low Temperature Thermomechanical Treatment of Two-Phase Titanium Alloy |
Stepan Stepanov |
15.40-16.00 |
Effect of Hardening Treatment of High-Nitrogen Cr-Mn-Mo-Steel on Mechanical Properties |
Julia Raskovalova |
13.00-14.00 |
Lunch
|
Modern technologies of ferrous and non-ferrous metals production |
||
10.07.2015 |
||
9.30-10.00 |
Some aspects of increasing the extraction of metals from refractory of copper and copper-zinc ores |
M. Viduetsky |
10.00-10.20 |
Estimation of Obsolete Scrap by Copper Content in EAF Semiproduct |
Aleksandr Zhdanov |
10.20-10.40 |
Technological Research of Refractory Multicomponent Middlings Processing |
Denis Rogozhnilov |
10.40-11.00 |
Investigation of Alternative Flux Additions and their Influence on Agglomeration of Donskoy GOK Chromite Fines |
Aleksandr Zhdanov |
11.00-11.20 |
Sulfuric Acid Pressure Leaching Converter Matte at Low Temperature |
Kirill Karimov |
11.20-11.40 |
Main Trends in the Development of Technology for Casting Steel into Ingots |
Aleksandr Romashkin |
11.40-12.00 |
Metallurgical Enterprises as Object of Criminological Examination |
Ivan Kozachenko |
12.00-12.20 |
Quality Assessment of Scrap for Hp EAF
|
Aleksandr Zhdanov |
12.20-12.40 |
Rational Composition of Chromite-Ore Agglomerate
|
Aleksandr Zhdanov |
12.40-13.00 |
The use of coal to produce metallized product
|
Ilya Khodosov |
13.00-14.00 |
Lunch
|
Thermal physics and computer science in metallurgy |
||
10.07.2015 |
||
14.00-14.20 |
A Comparative Study on Thermomechanical Analysis Of Smaw and Gtaw of High Carbon Steel Welded Joints |
Narendra Nath S. |
14.20-14.40 |
Application of the Method of Calculation of the Electron Concentration to Assess the Influence of Hydrogen on the Position of the Lines of Variable Solubility in the Ti – Cr System |
Stella Grib |
14.40-15.00 |
Definition of Rational Sequence of Raw Material Component Set in the Bunker of Chute-Type Bell-Less Charging Device (BLT) by Physical Modeling |
Aleksandr Kharchenko |
15.00-15.20 |
Simulation of Reactor Measurements as Part of University Training for NPP Operating Personnel |
Maria Volman |
15.20-15.40 |
Mathematical Modeling of Influence of Steel Chemical Composition of and Modes of Thermomechanical Treatment on Mechanical Properties of Hot Rolled Plate |
Eugenia Pozhidaeva |
© ФГАОУ ВО «УрФУ имени первого Президента России Б.Н. Ельцина»
Увидели ошибку?
выделите фрагмент и нажмите:
Ctrl + Enter
Дизайн портала: Artsofte